C2TES1 PROFESSIONAL STONE ADHESIVE
Single-Component, Non-Shrinking, Polymer-Modified Mortar for Interior/Exterior Large-Format Tiles & Natural Stone
Product Introduction
C2TES1 Professional Stone Adhesive
*A single-component, polymer-modified cementitious adhesive engineered for large-format tiles (≤1200×2400mm) and natural stone on interior/exterior substrates. Its non-shrinking formula eliminates voids, while hybrid polymer technology delivers extreme adhesion in demanding conditions.*
Revolutionizing Large-Format Installation
C2TES1’s breakthrough polymer technology ensures 100% tile contact – eradicating hollow sounds and bond failures. The non-shrinking formula is specifically designed for tiles up to 1200x2400mm.
Unmatched Early Strength
Achieves 1.25MPa tensile strength in 30 minutes – outperforming premium competitors:
40% stronger than MAPEI Ultralite S2 (1.0MPa)
56% stronger than ARDEX X77 (0.8MPa)
→ Enables 40% faster installation of heavy stone panels.
Certified for Critical Applications
EN 12004 C2TE certified (highest class for deformable substrates), trusted in extreme environments:
Underfloor Heating: 1.69MPa after thermal aging
Seismic Zones: 5.0mm lateral deformation capacity
Pool Surrounds: 1.10MPa after freeze-thaw cycles
Product Parameters
| Parameter | Value | Test Standard |
|---|---|---|
| Open Time | >30 minutes | EN 1348 |
| 30min Bond Strength | ≥1.25 MPa | EN 1348 |
| Slip Resistance | ≤0.3 mm | EN 1308 |
| Shrinkage Rate | <0.02% | ASTM C596 |
| Max Tile Size | 1200×2400 mm | |
| Coverage | 5-10 kg/m² |
Product Usage
Application Scenarios
- Large Panels: Secure bonding of porcelain/stone slabs up to 1200×2400mm
- Critical Substrates: Underfloor heating, elevator shafts, seismic zones
- Harsh Environments: Pool decks, balconies, commercial facades
Installation Protocol
1. Surface Prep: Clean, dry substrates (≥3MPa tensile strength)
2. Adhesive Application: 6×6mm notched trowel (3-6mm bed thickness)
3. Tile Setting: Adjust within 30min window
4. Curing: 24h no traffic, full strength in 72h
Hot Products
Rapid Setting Anchoring Cementitious Grout
Fast-setting cementitious grout for structural anchoring. Ideal for rail sleepers, bridge bearings, and tunnel rods
Carbon fiber mesh reinforcement for concrete structures. Improves load capacity, controls cracks, and resists corrosion.
High-performance two-component epoxy adhesive for concrete and steel bonding in underwater and high-humidity environments. Delivers excellent bonding strength, chemical resistance, and construction efficiency.
Epoxy-based flexible concrete for expansion joint repair, asphalt crack sealing, and pavement defect patching. Fast-setting, high-strength, and durable solution.
Start Enhancing Your Business With a Concrete Solution Today
Our products have undergone rigorous testing at our national testing laboratory (CABR testing center co., ltd). Renowned Fortune Global 500 firms such as China Railway Group Limited, China Communications Construction Company Limited, and Sinohydro are among our esteemed clients.
Navigation
Navigation
Contact Us
Get in Touch
Get in Touch
