Surface Restoration

  • Neoprene Latex Mortar - Anti-Corrosion Repair Mortar

Neoprene Latex Mortar - Anti-Corrosion Repair Mortar

Neoprene latex mortar A two-compononent latex modified cementitious mortar ensures durable anti-corrosion repair and waterproofing for concrete and steel structures in demanding applications.

Share:

Product Introduction

Neoprene latex mortar or RF cationic neoprene latex waterproof and anticorrosive mortar, is formulated from high-molecular polymer emulsion, special cementing materials, and premium aggregates through a specialized process.

This mortar stands out for its exceptional adhesion, crack resistance, frost resistance, anti-seepage, anti-corrosion, chloride ion penetration resistance, abrasion resistance, and anti-aging qualities.

It's widely used in strengthening building structures, waterproofing air defense facilities, preventing seepage in reservoir dams and ports, protecting chemical corrosion-prone areas like thermal pools, landfills, chemical warehouses, and tanks, repairing concrete on roads, bridge decks, tunnels, and culverts, and handling anti-leakage for roofs, bathrooms, and basements in industrial and civil buildings.

It also works well for waterproofing steel structures and reinforced concrete, with the added advantage of direct application on wet bases and strong bonding to various substrates. Suitable for projects in water conservancy, ports, highways, bridges, metallurgy, chemical industries, and more.


Product Parameters

Test ItemsCationic Neoprene Latex
AppearanceMilky white uniform emulsion
Viscosity (applying 4 cups, 25°C, s)12.0-15.5
Total solid content (%)47-52
Density (g/m³)≥1.080
Storage stability5°C-40°C, no obvious precipitation in 3 months

Test ItemsNeoprene Latex Cement Mortar
Compressive strength (MPa)≥20
Tensile strength (MPa)≥3.0
Bonding strength (MPa)≥1.2 with cement substrate; ≥2.0 with steel substrate
Impermeability grade (MPa)≥1.5
Water absorption (%)≤4.0
Applicable temperature (°C)≤60

Packaging and Storage: Liquid in 20kg, 50kg, or 200kg plastic barrels (shelf life: 12 months); powder in 50kg composite kraft paper bags (shelf life: 6 months). Store in ventilated, dry rooms at 5-30°C, protected from sunlight. Non-toxic, odorless, and eco-friendly for general transport.


Product Usage

For construction process:

  • Prime the surface with an even coat of neoprene latex cement mortar; apply the main layer once it's touch-dry.

  • Apply in strips or staggered blocks (max 12m² area, 1.5m width); maintain 24h intervals for joints. Pre-fix joint strips on slopes, remove after application, then seal seams with neoprene cement paste and mortar. Stagger joint positions in layered work.

  • Spread and press the mortar firmly, smoothing in one pass; pierce bubbles for a dense finish.

    For vertical or overhead surfaces over 10mm thick, layer in 5-10mm increments, proceeding when previous layer is touch-dry.

  • Add a polymer cement paste topcoat after 12-24h. Use mixed mortar before initial set; discard if gelled or clumped.

  • Cure by spraying water or covering with sealed plastic film for 7 days, followed by 21 days of natural curing.

Precautions:

  • Construct at 10-35°C ambient; insulate below 5°C. Avoid strong winds, rain, or direct sun exposure.

  • Store latex away from summer sunlight and winter freezing.

  • Skip application on bases cured less than 3 days.

  • Rinse base with water to dampen (no standing water) before use.

  • Level uneven metal bases with polymer cement mortar first.

  • Test mix ratios and methods based on site conditions before proceeding.

  • Clean tools and machinery immediately after use.

Product Documentation

Neoprene Latex Mortar

Neoprene latex mortar A two-compononent latex modified cementitious mortar ensures durable anti-corrosion repair and waterproofing for concrete and steel structures in demanding applications.

Mortero de Látex de Neopreno

Mortero de Reparación Anticorrosión Mortero flexible con látex de neopreno para reparar y proteger concreto contra corrosión.

Hot Products

UHPC Cladding Panels

UHPC Cladding Panels

New Generation Concrete Technology: UHPC UHPC cladding panel also known as UHPC panels, refers to the application of ultra-high performance concrete in the form of precast panels for architectural cladding purposes. UHPC is a specialized type of concrete that possesses exceptional strength, durability, and aesthetic properties.

Start Enhancing Your Business With a Concrete Solution Today

Our products have undergone rigorous testing at our national testing laboratory (CABR testing center co., ltd). Renowned Fortune Global 500 firms such as China Railway Group Limited, China Communications Construction Company Limited, and Sinohydro are among our esteemed clients.


Contact Us

Contact Us

Tel.:

+86 153 7387 2353 Manager Guo

E-mail:

WhatsApp:

Get in Touch

Get in Touch

CAPTCHA
Copyright © Sino-sina Building Materials Co., Ltd. All Rights Reserved | Sitemap | Powered by Reanod

We Value Your Privacy

In order to improve the website and user experience, this website uses cookies.