Our ultra-low viscosity epoxy injection grout penetrates deep to fix concrete cracks and boost structure life.
Product Introduction
Dealing with hairline cracks? This low viscosity resin grout flows where others can't, locking in fixes for good.
Our epoxy grouts tackle cracks from 0.05mm to >0.2mm wide, with models delivering tensile strength ≥20 MPa and impervious pressure ≥1.5 MPa. They bond strong in wet or dry conditions, making them go-to for defect repairs and base treatments in tough spots.
Product Parameters
Product Usage
Use JGN804 for >0.2mm cracks in buildings, HP-3 for 0.05-0.2mm foundation gaps, or HP-1 for hydraulic treatments.
Prep crack by cleaning, mix epoxy by model, inject with pressure, cure 4-24h per strength spec.
Teams use it for easy flow in tiny tiny spots and solid hold in wet areas, saving time on bridge jobs.
Product Documentation
Grout de Resina Epoxi HP-1
Epóxico de baja viscosidad para inyección en grietas finas.
Related Products
W-6 Polyurethane Injection Grout (Two‑Component, Closed‑Cell)
Two‑component PU injection grout that reacts to form a closed‑cell structure for reliable water cut‑off, void filling and slab undersealing. Adjustable gel time, high expansion and frost resistance (≥F200) enable rapid reopen on critical assets such as airport runways.
Ultra-Low Viscosity Epoxy Injection Grout
This epoxy injection grout lineup handles cracks from 0.05mm to >0.2mm, boasting tensile strengths ≥20 MPa and shear ≥15 MPa. Models like HP-3 deliver ≥70 MPa compression, making them reliable for wet or dry bonds in tough repairs.
AquaBond 40 NF Non-Foaming Structural PU Injection Resin
A dense, non-foaming structural injection resin that combines water sealing with reinforcement of concrete, rock and underground ground.
Inorganic Ground Consolidation Grout
An inorganic injection grout for strengthening loose coal, fractured rock and disturbed ground in mines, tunnels, shafts and underground chambers.
MT Expanding Borehole Sealing Grout
An expanding, low-permeability inorganic grout for long-term sealing of gas drainage and other underground mine boreholes.
High-Yield Two-Component Mine Backfill Grout
A pumpable two-component inorganic backfill grout for gob-side entry retaining, abandoned roadway filling, goaf filling and underground mine voids.
SW Ultra-High-Yield Mine Void Filling Grout
A two-component inorganic filling grout that uses water-to-powder ratios from 3:1 to 11:1 for economical filling of large underground voids.
Related Projects
Start Enhancing Your Business With a Concrete Solution Today
Our products have undergone rigorous testing at our national testing laboratory (CABR testing center co., ltd). Renowned Fortune Global 500 firms such as China Railway Group Limited, China Communications Construction Company Limited, and Sinohydro are among our esteemed clients.
Navigation
Navigation
Contact Us
Get in Touch
Get in Touch
