A high-performance additive to prepare flowable, high-strength, non-shrink cementitious grouts using local cement and sand.
Summary Benefits at a Glance:
Flexible Use – Converts local cement and sand into high-performance grout
High Strength – ≥20 MPa (1d), ≥40 MPa (3d), ≥60 MPa (28d)
Non-Shrink Expansion – Stable volume with zero bleeding
Product Introduction
CBGM-300 Cementitious Grouting Additive is engineered to simplify grouting preparation while maintaining international standards of performance. When mixed with local cement and sand, it produces a high-strength, flowable, and non-shrink grout comparable to factory-produced cementitious grouts.
Its unique formulation provides early and final strength, excellent fluidity, zero bleeding, and corrosion resistance, ensuring long-term durability. This solution significantly reduces logistics cost and increases flexibility for wind turbine foundations, machinery baseplates, anchorage systems, and civil or industrial infrastructure repair projects.
Product Parameters
| Property | Requirement |
|---|---|
| Fluidity (mm) | Initial ≥ 290 | 30 min ≥ 260 |
| Expansion Rate (%) | 3h: 0.1–3.5 | 24h–3h: 0.02–0.5 |
| Compressive Strength (MPa) | 1d ≥ 20.0 | 3d ≥ 40.0 | 28d ≥ 60.0 |
| Effect on Reinforcement | No corrosion |
| Bleeding Rate (%) | 0 |
| Recommended Mix Ratio | Cement 400 kg + Sand 550 kg + Additive 50 kg |
Product Usage
Mix 400 kg cement + 550 kg sand + 50 kg CBGM-300 additive in dry condition.
Add clean water (12–14% of total dry weight), adjust for workability.
Mix mechanically until a uniform, flowable grout is achieved.
Place immediately after mixing; avoid delays.
Cure according to standard construction practice.
Packaged in 25 kg moisture-proof composite bags.
Shelf life: 12 months when stored in cool, dry, ventilated areas.
Keep bags sealed and protected from moisture and frost.
Product Documentation
Hot Products
Our silane impregnating agent acts as an advanced silane penetrating sealer and silane water repellent, providing invisible, long-lasting protection for concrete structures. It penetrates deeply (≥3mm in ordinary concrete) to inhibit corrosion from seawater, salt spray, and deicing agents, ensuring durability in harsh environments like bridges an
Rapid Setting Anchoring Cementitious Grout
Fast-setting cementitious grout for structural anchoring. Ideal for rail sleepers, bridge bearings, and tunnel rods
Carbon fiber mesh reinforcement for concrete structures. Improves load capacity, controls cracks, and resists corrosion.
High-performance two-component epoxy adhesive for concrete and steel bonding in underwater and high-humidity environments. Delivers excellent bonding strength, chemical resistance, and construction efficiency.
Epoxy-based flexible concrete for expansion joint repair, asphalt crack sealing, and pavement defect patching. Fast-setting, high-strength, and durable solution.
Start Enhancing Your Business With a Concrete Solution Today
Our products have undergone rigorous testing at our national testing laboratory (CABR testing center co., ltd). Renowned Fortune Global 500 firms such as China Railway Group Limited, China Communications Construction Company Limited, and Sinohydro are among our esteemed clients.
Navigation
Navigation
Contact Us
Get in Touch
Get in Touch
