An eco-friendly silicate-based capillary waterproofer for concrete, providing long-term impermeability and durability.
Summary Benefits at a Glance
Penetrates concrete capillaries, blocks pores and microcracks
Enhances impermeability and durability against seepage
Resists chloride penetration, carbonation and freeze–thaw cycles
Water-based, non-toxic and easy to apply
Product Introduction
Our product is a water-based capillary inorganic concrete waterproofer formulated from silicate mineral solutions and catalytic additives. Applied by spraying, brushing or rolling, it penetrates concrete substrates and chemically reacts with free calcium hydroxide to form stable crystalline compounds. This crystalline reaction blocks capillary pores and microcracks, significantly improving impermeability, reducing water absorption and enhancing durability. It is environmentally friendly, non-toxic, odorless and suitable for both new projects and repair applications.
Product Parameters
| Test Item | Value |
|---|---|
| Appearance | Colorless, transparent, odorless liquid |
| Density | 1.07 g/cm³ |
| pH | 11 ± 1 |
| Viscosity | 11.0 ± 1.0 s |
| Surface tension | 36.0 mN/m |
| Gelation time (final) | ≤ 400 min |
| Water permeability / Penetration height | ≤ 35 mm |
| Weathering stability (10 cycles) | No visible change |
Product Usage
Application Areas
Bridges, tunnels, highways and coastal concrete structures
Basements, retaining walls, water tanks, reservoirs and treatment plants
Industrial floors, garages and warehouses requiring dust-proof and abrasion resistance
Marine engineering, docks, ports and offshore foundations
Construction Notes
Substrate must be clean, solid, free from laitance, dust and grease
Apply with spray, roller or brush until fully absorbed
Dosage: 3–5 m²/kg depending on porosity
Allow ≥24 h curing before water exposure
Application temperature: >5 °C; avoid frost, rain or direct sun
Packaging & Shelf Life
Supplied in 20 kg pails
Shelf life: 12 months in sealed containers under cool, dry and ventilated storage
Product Documentation
Water-Based Capillary Inorganic Concrete Waterproofer
Water-Based Capillary Inorganic Concrete Waterproofer | Silicate Concrete Protection
Hot Products
Our silane impregnating agent acts as an advanced silane penetrating sealer and silane water repellent, providing invisible, long-lasting protection for concrete structures. It penetrates deeply (≥3mm in ordinary concrete) to inhibit corrosion from seawater, salt spray, and deicing agents, ensuring durability in harsh environments like bridges an
Rapid Setting Anchoring Cementitious Grout
Fast-setting cementitious grout for structural anchoring. Ideal for rail sleepers, bridge bearings, and tunnel rods
Carbon fiber mesh reinforcement for concrete structures. Improves load capacity, controls cracks, and resists corrosion.
High-performance two-component epoxy adhesive for concrete and steel bonding in underwater and high-humidity environments. Delivers excellent bonding strength, chemical resistance, and construction efficiency.
Epoxy-based flexible concrete for expansion joint repair, asphalt crack sealing, and pavement defect patching. Fast-setting, high-strength, and durable solution.
Start Enhancing Your Business With a Concrete Solution Today
Our products have undergone rigorous testing at our national testing laboratory (CABR testing center co., ltd). Renowned Fortune Global 500 firms such as China Railway Group Limited, China Communications Construction Company Limited, and Sinohydro are among our esteemed clients.
Navigation
Navigation
Contact Us
Get in Touch
Get in Touch
