T99 silane impregnating agent is a high-performance penetrating sealer based on n-butyltriethoxysilane, designed for long-lasting concrete protection without altering surface appearance.
Summary Benefits at a Glance:
Deep penetration up to 3mm in ordinary concrete for robust hydrophobic barrier.
Reduces chloride absorption by over 90% to prevent corrosion.
Maintains breathability to avoid moisture buildup and efflorescence.
Product Introduction
T99 silane impregnating agent provides advanced protection for concrete and cementitious surfaces.
Formulated with high-purity n-butyltriethoxysilane, it penetrates deeply into pores to form a hydrophobic, cross-linked structure.
This non-film-forming approach repels water and contaminants while allowing vapor to escape, making it suitable for structures like bridges, highways, and marine installations.
With a silane content of at least 98%, it offers reliable defense against environmental damage, extending the lifespan of concrete without changing its look or texture.
Silane impregnating agent can be used for the protection of new concrete structures as well as for the reinforcement and repalof oldconcrete buildings, such as harbor wharves, cros-sea bridges, cross-river bridges, water conservancy project dams, urban elevated roads, highgrade highway bridges, railway bridges, tunnels, airpor pavements, exposed concrete buildings, thermal power plants,nuclear power plantssewage treatment plants, and so on.
They are particularly suitable for the protection of various concrete structuresthat are subject to seawatelcorrosion, salt fog corrosion, deicing agent corrosion, and freeze-thaw damage.
Product Parameters
Parameter | Value |
| Primary Active Ingredient | N-Butyltriethoxysilane |
| Silane Content (%) | ≥98 |
| Siloxane Content (%) | ≤0.3 |
| Chloride Ion Content | ≤0.01% |
| Water Absorption Rate (mm/min^{1/2}) | ≤0.01 |
| Penetration Depth (mm) | Ordinary concrete ≥3; High-performance concrete ≥2 |
| Chloride Absorption Reduction (%) | ≥90 |
Product Usage
Prepare the surface by cleaning off dust, oil, and old coatings; ensure concrete is dry and at least 28 days old.
Apply T99 using a low-pressure sprayer or roller in one or two wet-on-wet coats, with coverage of 200-400 g/m² based on porosity.
Allow 1-2 hours for surface drying and 24-48 hours for full cure at 20°C. Best applied between 5-35°C, avoiding rain or high humidity.
Ideal for protecting bridges, facades, and industrial floors from water and chloride damage.
Hot Products
Our silane impregnating agent acts as an advanced silane penetrating sealer and silane water repellent, providing invisible, long-lasting protection for concrete structures. It penetrates deeply (≥3mm in ordinary concrete) to inhibit corrosion from seawater, salt spray, and deicing agents, ensuring durability in harsh environments like bridges an
Rapid Setting Anchoring Cementitious Grout
Fast-setting cementitious grout for structural anchoring. Ideal for rail sleepers, bridge bearings, and tunnel rods
Carbon fiber mesh reinforcement for concrete structures. Improves load capacity, controls cracks, and resists corrosion.
High-performance two-component epoxy adhesive for concrete and steel bonding in underwater and high-humidity environments. Delivers excellent bonding strength, chemical resistance, and construction efficiency.
Epoxy-based flexible concrete for expansion joint repair, asphalt crack sealing, and pavement defect patching. Fast-setting, high-strength, and durable solution.
Start Enhancing Your Business With a Concrete Solution Today
Our products have undergone rigorous testing at our national testing laboratory (CABR testing center co., ltd). Renowned Fortune Global 500 firms such as China Railway Group Limited, China Communications Construction Company Limited, and Sinohydro are among our esteemed clients.
Navigation
Navigation
Contact Us
Get in Touch
Get in Touch
