T80 silane impregnating agent comes as a thixotropic paste using n-octyltriethoxysilane, ideal for protecting vertical concrete from water and salts without dripping.
Summary Benefits at a Glance:
Penetration of 3-5mm in <C45 concrete for effective hydrophobic layer.
Lowers chloride absorption by more than 80% to resist corrosion.
Improves salt-freeze cycles by at least 15 over untreated surfaces.
Neutral pH and low odor make it easy to handle on site.
Product Introduction
T80 silane impregnating agent is formulated as a paste for precise application on vertical and overhead concrete. Powered by n-octyltriethoxysilane at 80% or higher, it diffuses into pores to build a hydrophobic structure that withstands water, salts, and alkalis. This breathable protection is key for tunnels, dams, and building facades where environmental stress is high. It maintains concrete's natural vapor flow, preventing issues like spalling, and offers extended durability in de-icing or marine areas.
Silane impregnating agent can be used for the protection of new concrete structures as well as for the reinforcement and repalof oldconcrete buildings, such as harbor wharves, cros-sea bridges, cross-river bridges, water conservancy project dams, urban elevated roads, highgrade highway bridges, railway bridges, tunnels, airpor pavements, exposed concrete buildings, thermal power plants,nuclear power plantssewage treatment plants, and so on.
They are particularly suitable for the protection of various concrete structuresthat are subject to seawatelcorrosion, salt fog corrosion, deicing agent corrosion, and freeze-thaw damage.
Product Parameters
Parameter | Value |
| Primary Active Ingredient | N-Octyltriethoxysilane |
| Silane Content (%) | ≥80 |
| Siloxane Content (%) | Not specified |
| Chloride Ion Content | ≤100 g/m³ |
| Water Absorption Rate (mm/min^{1/2}) | Not specified |
| Penetration Depth (mm) | <C45 concrete 3-5; >C45 concrete 2-3 |
| Chloride Absorption Reduction (%) | >80 |
| Density (g/ml at 25°C) | 0.9 ± 0.1 |
| pH Value | 7 ± 1 |
| Drying Coefficient (%) | >30 |
| Water Absorption Ratio (%) | <7.5 |
| Alkali Resistance | <10% after treatment |
| Salt-Freeze Resistance | ≥15 more cycles than reference |
| Odor | No obvious irritating odor |
Product Usage
Remove loose materials and clean the surface with water or detergent, letting it dry fully. Spread T80 paste evenly with a trowel or brush, using 300-500 g/m² without dilution.
It sets initially in 2-4 hours and fully cures in 7 days.
Apply at 5-40°C, protecting from rain for 24 hours. Suited for vertical surfaces like tunnels, facades, and bridges to guard against water, salts, and weathering.
Hot Products
Our silane impregnating agent acts as an advanced silane penetrating sealer and silane water repellent, providing invisible, long-lasting protection for concrete structures. It penetrates deeply (≥3mm in ordinary concrete) to inhibit corrosion from seawater, salt spray, and deicing agents, ensuring durability in harsh environments like bridges an
Rapid Setting Anchoring Cementitious Grout
Fast-setting cementitious grout for structural anchoring. Ideal for rail sleepers, bridge bearings, and tunnel rods
Carbon fiber mesh reinforcement for concrete structures. Improves load capacity, controls cracks, and resists corrosion.
High-performance two-component epoxy adhesive for concrete and steel bonding in underwater and high-humidity environments. Delivers excellent bonding strength, chemical resistance, and construction efficiency.
Epoxy-based flexible concrete for expansion joint repair, asphalt crack sealing, and pavement defect patching. Fast-setting, high-strength, and durable solution.
Start Enhancing Your Business With a Concrete Solution Today
Our products have undergone rigorous testing at our national testing laboratory (CABR testing center co., ltd). Renowned Fortune Global 500 firms such as China Railway Group Limited, China Communications Construction Company Limited, and Sinohydro are among our esteemed clients.
Navigation
Navigation
Contact Us
Get in Touch
Get in Touch
