SINO-SINA’s Silane Impregnating Agent Series: High-performance, surface-applied, non-film-forming waterproofing systems based on alkylalkoxysilane technology. As silane penetrating sealer and water repellent, they penetrate concrete/masonry deeply (≥3mm), forming hydrophobic barrier for lasting protection.
High-purity formula with ≥98% silane content ensures effective waterproofing and corrosion resistance.
Product Introduction
Silane Impregnating Agent (silane penetrating sealer or silane water repellent) delivers long-term durability for reinforced concrete. Penetrates deeply (≥3mm) to form waterproof, breathable invisible layer, suppressing corrosion from seawater, salt mist, deicing salts without altering aesthetics. Compliant with JTS/T 209-2020, JT/T 991-2015. Variants: T99 (octyl trialkoxy silane, ≥98% content); T80 (paste, ≥80% content). Versatile for bridges, tunnels, marine facilities. Ideal for "silane penetrating sealer for concrete" searches.
Advanced Silane Technology: Alkylalkoxysilane/siloxane formulas for deep penetration, hydrophobic protection, chloride resistance.
Non-Film-Forming & Breathable: Internal pore protection, no surface film; preserves appearance, breathability, prevents blistering/cracking.
Proven Durability: >90% reduction in water/chloride ingress; suits marine, highway, freeze-thaw.
Eco-Friendly: Solvent-free, low-VOC; REACH-compliant for green projects.
Versatile Range: For bridges, tunnels, ports, decks, historic buildings; liquid/paste for horizontal/vertical/indoor.
Product Parameters
| Parameter | T99 Silane lmpregnating Paint | T99A lsobutyl Silane lmpregnating Paint | T80 Octyl Silane Paste | T80A lsooctyl Silane Paste |
| Main Component | Octyl Trialkoxy Silane | Isobutyl Triethoxy Silane | Octyl Trialkoxy Silane | Isooctyl Triethoxy Silane |
| Silane Content (%) | ≥98 | ≥98 | ≥80 | ≥80 |
| Siloxane Content (%) | ≤0.3 | ≤0.3 | - | - |
| Chloride Ion Content | ≤0.01% | ≤0.01% | ≤100 g/m³ | ≤100 g/m³ |
| Water Absorption Rate (mm/min¹/²) | ≤0.01 | ≤0.01 | - | - |
| Penetration Depth (mm) | Ordinary concrete ≥3, High-performance ≥2 | Same as T99 | ≤C45 concrete 3-5, >C45 2-3 | Same as T80 |
| Chloride Absorption Reduction (%) | ≥90 | ≥90 | >80 | >80 |
| Density (g/ml, 25℃) | - | - | 0.9±0.1 | 0.9±0.1 |
| pH Value | - | - | 7±1 | 7±1 |
| Drying Coefficient (%) | - | - | >30 | >30 |
| Water Absorption Ratio (%) | - | - | <7.5 | <7.5 |
| Alkali Resistance | - | - | <10% after treatment | Same as T80 |
| Salt-Freeze Resistance | - | - | ≥15 more cycles than reference | Same as T80 |
| Odor | - | - | No obvious irritating odor | Same as T80 |
Product Usage
For optimal results with this silane impregnating agent (functioning as a silane penetrating sealer or silane water repellent), follow these steps tailored for concrete structures like bridges, dams, and tunnels:
Construction Conditions: Apply after 2-4 weeks curing for new concrete or 1-2 weeks for repairs. Ensure ambient temperature 5-40℃, wind ≤6 level, and no rain or damp surfaces. Confirm concrete moisture ≤8%.
Surface Preparation: Repair defects, clean with wire brush, compressed air, and fresh water to remove dust/oil. Dry for >3 days; ensure no release agents.
Testing: Conduct spray trials before large-scale use; core sample to verify ≥3mm penetration and ≤0.01 mm/min¹/² water absorption.
Application:
Liquid (T99/T99A): Spray continuously to saturation (overflow), brush flats to wet, verticals bottom-up with 15-20cm sag. Two coats at 300g/m² each, 4-6h interval.
Paste (T80/T80A): Use airless sprayer for large areas or brush/scraper for small; ensure uniform coverage.
Curing & Precautions: Rain-proof for 24h; air dry ≥36h summer/≥72h winter. Stop if rain starts and cover. Surface may darken temporarily but restores without performance loss.
Safety: Wear PPE (masks, goggles, gloves); rinse contact with water. Non-flammable; store in cool, dry place (shelf life 12 months).
Related Products
Our silane impregnating agent acts as an advanced silane penetrating sealer and silane water repellent, providing invisible, long-lasting protection for concrete structures. It penetrates deeply (≥3mm in ordinary concrete) to inhibit corrosion from seawater, salt spray, and deicing agents, ensuring durability in harsh environments like bridges an
T99A Silane Impregnating Agent
T99A silane impregnating agent leverages isobutyltriethoxysilane for durable, breathable protection on concrete in demanding settings.
T80 silane impregnating agent is a paste-based solution with n-octyltriethoxysilane, tailored for vertical applications and strong environmental resistance on concrete.
T80A Silane Impregnating Agent
T80A silane impregnating agent in paste form utilizes isooctyltriethoxysilane for superior hydrophobic protection on concrete facing severe weathering.
T99 silane impregnating agent uses n-butyltriethoxysilane to deliver effective, breathable waterproofing for concrete surfaces exposed to harsh conditions.
Water-Based Capillary Inorganic Concrete Waterproofer
Inorganic water-based silicate solution that penetrates concrete, blocks capillaries and microcracks, and enhances durability.
Related Projects
Start Enhancing Your Business With a Concrete Solution Today
Our products have undergone rigorous testing at our national testing laboratory (CABR testing center co., ltd). Renowned Fortune Global 500 firms such as China Railway Group Limited, China Communications Construction Company Limited, and Sinohydro are among our esteemed clients.
Navigation
Navigation
Contact Us
Get in Touch
Get in Touch
