Metallic aggregate floor hardener engineered for anti-static, non-sparking and abrasion-resistant industrial flooring.
Summary Benefits at a Glance
Anti-static conductivity – surface resistivity 5×10⁴–1×10⁸ Ω
Non-sparking performance – safe for explosion-prone areas
Abrasion & impact resistance – wear loss ≤ 0.012 g/cm²
Fire rating A1 – durable non-combustible industrial flooring
Product Introduction
Our metallic aggregate dry-shake hardener is designed for industrial floors with anti-static, non-sparking and high wear resistance requirements. It is applied to fresh concrete surfaces and power-trowelled to create a dense, conductive wear layer. The product meets the demands of petrochemical plants, gas stations, electronics workshops, warehouses and defense facilities, where safe, explosion-proof and durable flooring is essential. Its Class A1 fire rating, abrasion resistance and mechanical strength make it a reliable choice for heavy-duty industrial flooring systems.
Product Parameters
| Test Item | Technical Index | Standard |
|---|---|---|
| Anti-static performance (surface resistivity) | 5×10⁴ – 1×10⁸ Ω | SJ/T 10694-2006 |
| Fire rating | Class A1 | — |
| Abrasion resistance (gear method) | ≤ 0.012 g/cm² | — |
| Compressive strength (28 d) | ≥ 90 MPa | GB 50209-2010 |
| Flexural strength (28 d) | ≥ 11.5 MPa | GB 50209-2010 |
| Tensile strength | 3.9 MPa | — |
| Point-to-point resistance | 1×10⁵ – 1×10¹⁰ Ω | SJ/T 10694-2006 |
| Volume resistivity | 1×10⁵ – 1×10⁹ Ω | SJ/T 10694-2006 |
| Non-sparking property | No spark observed | GB 50209-2010 |
Product Usage
Petrochemical plants & oil depots – explosion-proof anti-static floors
Gas stations & fuel storage facilities – non-sparking heavy-duty flooring
Electronics & battery workshops – ESD-safe conductive flooring
Warehouses & logistics centers – high-wear industrial floors
Pharmaceutical, medical, military & defense facilities – safe, durable non-sparking flooring
Application Notes
Broadcast material onto fresh concrete in two stages (2/3 then 1/3), trowel after each application
Power-trowel to achieve dense, smooth metallic finish
Cure ≥ 7 days with curing compound or moist cover
Packaging: 25 kg moisture-proof composite bags
Shelf life: 6 months in dry, ventilated storage
Product Documentation
Metallic Aggregate Anti-Static Non-Sparking Floor Hardener
Metallic Aggregate Floor Hardener | Anti-Static Non-Sparking Industrial Flooring
Hot Products
Our silane impregnating agent acts as an advanced silane penetrating sealer and silane water repellent, providing invisible, long-lasting protection for concrete structures. It penetrates deeply (≥3mm in ordinary concrete) to inhibit corrosion from seawater, salt spray, and deicing agents, ensuring durability in harsh environments like bridges an
Rapid Setting Anchoring Cementitious Grout
Fast-setting cementitious grout for structural anchoring. Ideal for rail sleepers, bridge bearings, and tunnel rods
Carbon fiber mesh reinforcement for concrete structures. Improves load capacity, controls cracks, and resists corrosion.
High-performance two-component epoxy adhesive for concrete and steel bonding in underwater and high-humidity environments. Delivers excellent bonding strength, chemical resistance, and construction efficiency.
Epoxy-based flexible concrete for expansion joint repair, asphalt crack sealing, and pavement defect patching. Fast-setting, high-strength, and durable solution.
Start Enhancing Your Business With a Concrete Solution Today
Our products have undergone rigorous testing at our national testing laboratory (CABR testing center co., ltd). Renowned Fortune Global 500 firms such as China Railway Group Limited, China Communications Construction Company Limited, and Sinohydro are among our esteemed clients.
Navigation
Navigation
Contact Us
Get in Touch
Get in Touch
