H-102 is a high-flow cementitious self-leveling screed for rapid smoothing and precise leveling of industrial and commercial floors.
Summary Benefits at a Glance
Smooth finish – high flow and automatic leveling, seamless surface
Fast return to service – quick early strength, strong bond to substrate
Durable – abrasion and impact resistance, low shrinkage
Versatile – finish wear layer or underlayment for PVC, tile, epoxy, wood
Product Introduction
H-102 Self-Leveling Screed is formulated for rapid, precision leveling in factories, warehouses, shopping centers, basements and sports venues. Mixed with water and poured, it flows to form a dense, smooth layer that can be used as a wear-resistant finish or as an underlayment beneath floor coverings such as PVC, tile, epoxy or wood. The screed develops strength quickly, resists abrasion and impact, and shows low shrinkage for dimensional stability.
Product Parameters
| Test Item | Requirement |
|---|---|
| Flowability (mm, initial) | ≥ 130 |
| Flowability (mm, after 20 min) | ≥ 130 |
| Compressive strength (24 h) | ≥ 6.0 MPa |
| Flexural strength (24 h) | ≥ 2.0 MPa |
| Bonding strength | ≥ 1.0 MPa |
| Wear resistance | ≤ 0.50 g/cm² |
| Dimensional stability | −0.15% ~ +0.15% |
| Surface finish | Smooth, no shrinkage cracks |
Product Usage
Substrate preparation
Substrate must be sound, clean and dry; remove dust, oil, laitance and loose particles.
Prime as needed to improve bonding and control absorption.
Mixing & application
Mix with clean water (21–23% by weight) using a mechanical mixer until homogeneous.
Pour and spread with trowel/squeegee; immediately de-air using a spike roller.
Recommended thickness: 3–5 mm.
Curing & commissioning
Protect from sun/wind; avoid rapid drying.
Light foot traffic typically after 1–3 days (depend on ambient conditions).
Packaging & Storage
25 kg moisture-proof composite bags; shelf life: 6 months in dry, ventilated storage; keep sealed and protected from moisture/sunlight.
Hot Products
Our silane impregnating agent acts as an advanced silane penetrating sealer and silane water repellent, providing invisible, long-lasting protection for concrete structures. It penetrates deeply (≥3mm in ordinary concrete) to inhibit corrosion from seawater, salt spray, and deicing agents, ensuring durability in harsh environments like bridges an
Rapid Setting Anchoring Cementitious Grout
Fast-setting cementitious grout for structural anchoring. Ideal for rail sleepers, bridge bearings, and tunnel rods
Carbon fiber mesh reinforcement for concrete structures. Improves load capacity, controls cracks, and resists corrosion.
High-performance two-component epoxy adhesive for concrete and steel bonding in underwater and high-humidity environments. Delivers excellent bonding strength, chemical resistance, and construction efficiency.
Epoxy-based flexible concrete for expansion joint repair, asphalt crack sealing, and pavement defect patching. Fast-setting, high-strength, and durable solution.
Start Enhancing Your Business With a Concrete Solution Today
Our products have undergone rigorous testing at our national testing laboratory (CABR testing center co., ltd). Renowned Fortune Global 500 firms such as China Railway Group Limited, China Communications Construction Company Limited, and Sinohydro are among our esteemed clients.
Navigation
Navigation
Contact Us
Get in Touch
Get in Touch
