H-101 is a dry-shake floor hardener for creating dense, dust-free and impact-resistant industrial floors, available in metallic and non-metallic versions.
Summary Benefits at a Glance
High wear & impact performance – dense, durable surface layer
Dual options – metallic or non-metallic aggregate to match duty level
Strong bond – non-delaminating, crack-resistant finish
Cost-effective – long service life and reduced maintenance
Product Introduction
H-101 Wear-Resistant Floor Hardener is broadcast onto fresh concrete and power-trowelled to form a dense, durable wear layer with excellent abrasion and impact resistance. The system is supplied in metallic aggregate and non-metallic aggregate types to meet different loading and traffic conditions. Typical uses include warehouses, logistics centers, parking garages, manufacturing floors and commercial facilities where a dust-free, long-life floor is required.
Product Parameters
| Test Item | Non-Metallic Aggregate Type | Metallic Aggregate Type |
|---|---|---|
| Mohs hardness | ≥ 7 | ≥ 8 |
| Compressive strength (28 d) | ≥ 80 MPa | ≥ 90 MPa |
| Flexural strength (28 d) | ≥ 11.5 MPa | ≥ 11.5 MPa |
| Reference dosage | 4–6 kg/m² per 3 mm thickness | 4–6 kg/m² per 3 mm thickness |
Product Usage
Typical applications
Warehouses, logistics & distribution centers
Parking lots/garages; commercial and exhibition halls
Industrial workshops and heavy-duty production areas
Construction notes
Place and level base concrete to spec. When the surface sheen disappears, apply in two passes: first 2/3 of material, then the remaining 1/3 perpendicular to the first.
Trowel after each broadcast; power-trowel to a dense, smooth finish.
Cut joints per design; cure with compound or moist curing for ≥ 7 days.
Protect from premature drying; keep surface clean during early use.
Packaging & Storage
25 kg moisture-proof composite bags; shelf life: 6 months in dry, ventilated storage; keep sealed and protected from moisture/sunlight.
Hot Products
Our silane impregnating agent acts as an advanced silane penetrating sealer and silane water repellent, providing invisible, long-lasting protection for concrete structures. It penetrates deeply (≥3mm in ordinary concrete) to inhibit corrosion from seawater, salt spray, and deicing agents, ensuring durability in harsh environments like bridges an
Rapid Setting Anchoring Cementitious Grout
Fast-setting cementitious grout for structural anchoring. Ideal for rail sleepers, bridge bearings, and tunnel rods
Carbon fiber mesh reinforcement for concrete structures. Improves load capacity, controls cracks, and resists corrosion.
High-performance two-component epoxy adhesive for concrete and steel bonding in underwater and high-humidity environments. Delivers excellent bonding strength, chemical resistance, and construction efficiency.
Epoxy-based flexible concrete for expansion joint repair, asphalt crack sealing, and pavement defect patching. Fast-setting, high-strength, and durable solution.
Start Enhancing Your Business With a Concrete Solution Today
Our products have undergone rigorous testing at our national testing laboratory (CABR testing center co., ltd). Renowned Fortune Global 500 firms such as China Railway Group Limited, China Communications Construction Company Limited, and Sinohydro are among our esteemed clients.
Navigation
Navigation
Contact Us
Get in Touch
Get in Touch
