EGM is a seamless epoxy self-leveling system delivering stable anti-static performance and non-sparking safety with high chemical and abrasion resistance.
Summary Benefits at a Glance
Stable ESD control – surface/volume resistivity 10^5–10^8 Ω
Non-sparking safety – suitable for hazardous and static-sensitive areas
Durable surface – abrasion, impact, oil and chemical resistance
Seamless finish – dense, glossy, dust-free, easy to clean
Product Introduction
EGM Epoxy Anti-Static Self-Leveling Coating forms a smooth, glossy and conductive floor for environments that demand non-sparking safety and reliable ESD control. The system bonds strongly to concrete, resists abrasion and chemicals, and maintains stable resistivity over time. Typical uses include electronics and micro-electronics manufacturing, telecom and precision instrument plants, pharmaceutical and defense facilities, and large clean rooms.
Product Parameters
| Test Item | Unit | Result |
|---|---|---|
| Adhesion strength | Grade | 1 |
| Pencil hardness | H | ≥ 2 |
| Abrasion resistance (750 g / 500 r) | g | ≤ 0.03 |
| Impact resistance | Kg·cm | Pass at 40 |
| Flexibility | mm | Pass at 3 |
| Water resistance | — | No change after 48 h |
| Acid resistance (10% H2SO4) | — | No change after 56 d |
| Alkali resistance (10% NaOH) | — | No change after 56 d |
| Oil resistance | — | No change after 56 d |
| Surface resistivity | Ω | 10^5 – 10^8 |
| Volume resistivity | Ω | 10^5 – 10^8 |
Product Usage
Substrate preparation
Concrete must be sound, dry and clean; grind and vacuum to remove laitance and dust.
Repair cracks/voids; verify moisture content is within spec.
Application steps
Primer – Apply conductive epoxy primer to improve adhesion.
Copper tape network – Install as per ESD design.
Conductive intermediate layer – Roll/brush/squeegee for uniform conductivity.
Self-leveling coat – Mix per TDS; pour and trowel for even self-leveling finish.
Curing – Protect from moisture, dust and sunlight; allow proper cure before service.
Commissioning & maintenance
Verify ESD performance and grounding continuity before handover.
Use neutral detergents; avoid strong alkali/solvent cleaning in early stage.
Packaging & Shelf Life
20 kg sets; shelf life 12 months (dry, ventilated storage)
Product Documentation
EGM – Epoxy Anti-Static Self-Leveling Coating
EGM Epoxy Anti-Static Self-Leveling Coating | Conductive, Non-Sparking ESD Flooring
Hot Products
Our silane impregnating agent acts as an advanced silane penetrating sealer and silane water repellent, providing invisible, long-lasting protection for concrete structures. It penetrates deeply (≥3mm in ordinary concrete) to inhibit corrosion from seawater, salt spray, and deicing agents, ensuring durability in harsh environments like bridges an
Rapid Setting Anchoring Cementitious Grout
Fast-setting cementitious grout for structural anchoring. Ideal for rail sleepers, bridge bearings, and tunnel rods
Carbon fiber mesh reinforcement for concrete structures. Improves load capacity, controls cracks, and resists corrosion.
High-performance two-component epoxy adhesive for concrete and steel bonding in underwater and high-humidity environments. Delivers excellent bonding strength, chemical resistance, and construction efficiency.
Epoxy-based flexible concrete for expansion joint repair, asphalt crack sealing, and pavement defect patching. Fast-setting, high-strength, and durable solution.
Start Enhancing Your Business With a Concrete Solution Today
Our products have undergone rigorous testing at our national testing laboratory (CABR testing center co., ltd). Renowned Fortune Global 500 firms such as China Railway Group Limited, China Communications Construction Company Limited, and Sinohydro are among our esteemed clients.
Navigation
Navigation
Contact Us
Get in Touch
Get in Touch
