Fiber Reinforcement

Basalt fiber mesh

Basalt fiber mesh (geogrid) is woven by basalt fiber with strong alkali and acid resistance as raw materials, and then processed with asphalt (adhesive) and dried into shape. 


Keywords:

Basalt Fiber Mesh

Concrete Reinforcement Mesh 

Non-corrosive concrete gridPage

Share:

Product Introduction

Product Overview

Basalt fiber mesh (geogrid) is woven by basalt fiber with strong alkali and acid resistance as raw materials, and then processed with asphalt (adhesive) and dried into shape. 

Comparing with the elastic modulus of asphalt concrete, basalt fiber asphalt concrete at room temperature has stronger anti-deformation ability, and its breaking elongation is about 3.1%. Basalt fiber has the advantages covering high temperature resistance, freeze-thaw resistance (-260~650℃), consistent thermal expansion coefficient with asphalt concrete, high tensile strength, UV resistance, strong chemical stability, anti-aging, etc. Since the mixing temperature of asphalt mixtures is as high as 190℃, the high-temperature resistant basalt fiber is a new material that replaces the competitive advantages of polyester fiber and lignin fiber.


Applications

◆ Concrete Bridge Decks:Prevents reflective cracking in asphalt overlays – Used in Norway's E39 Coastal Highway Project (30% cost savings vs steel).

◆ Marine Seawalls:  Zero corrosion in salt spray zones – 50-year lifespan guarantee for Dubai Palm Island reinforcemen.

◆ Road Rehabilitatio:  Reduces road repair frequency by 60% – Applied in Germany's A3 Autobahn crack mitigation.

◆ Earthquake Zones:  Flexural strength >22 MPa  – Critical for seismic retrofitting.

 Anti-cracking and structural strengthening in precast concrete.

 Concrete wall and slab reinforcement.


Product Features

Ultra-high temperature and ultra-low temperature performance to prevent cracks in asphalt pavement;

High tensile strength;

No long-term creep, high thermal stability

Good compatibility with asphalt mixture

Stable physical and chemical performances, which can resist biological erosion and climate change. 

FAQ 

Q:What is basalt fiber mesh used for?

A:Basalt fiber mesh is primarily used for reinforcing concrete structures, including walls, slabs, pavements, and tunnels. It’s also ideal for preventing cracks in plaster, masonry, and precast components. Due to its high alkali resistance, it outperforms steel mesh in corrosive environments.


Q:How is basalt fiber mesh different from fiberglass mesh?

A:While both meshes serve similar purposes, basalt fiber mesh offers:

  • Higher tensile strength

  • Better alkali and chemical resistance

  • Superior thermal stability

  • Longer durability in harsh environments
    It's especially recommended for high-performance and infrastructure-grade applications.




Product Parameters

Performance metrics

PropertyValue 
Appearance5x5 mm, 10x10 mm, or custom
Roll Width1m / 1.2m / 2m
Roll Length50m / 100m
Tensile Strength ≥ 1250 MPa
Filament Diameter 13μm – 20μm
Density2.6–2.8 g/cm³
CoatingAlkali-resistant polymer coating (optional)  


Hot Products

Rapid Setting Anchoring Cementitious Grout

Rapid Setting Anchoring Cementitious Grout

Fast-setting cementitious grout for structural anchoring. Ideal for rail sleepers, bridge bearings, and tunnel rods

Carbon Fiber Mesh

Carbon Fiber Mesh

Carbon fiber mesh reinforcement for concrete structures. Improves load capacity, controls cracks, and resists corrosion.

Underwater Structural Epoxy Adhesive

Underwater Structural Epoxy Adhesive

High-performance two-component epoxy adhesive for concrete and steel bonding in underwater and high-humidity environments. Delivers excellent bonding strength, chemical resistance, and construction efficiency.

Epoxy-Based Elastic Concrete

Epoxy-Based Elastic Concrete

Epoxy-based flexible concrete for expansion joint repair, asphalt crack sealing, and pavement defect patching. Fast-setting, high-strength, and durable solution.

Leikesi-Copper-coated Steel Fiber

Leikesi-Copper-coated Steel Fiber

Copper-plated steel fiber with high tensile strength and corrosion resistance, ideal for reinforcing concrete in infrastructure and UHPC applications.

Start Enhancing Your Business With a Concrete Solution Today

Our products have undergone rigorous testing at our national testing laboratory (CABR testing center co., ltd). Renowned Fortune Global 500 firms such as China Railway Group Limited, China Communications Construction Company Limited, and Sinohydro are among our esteemed clients.


Contact Us

Contact Us

Tel.:

+86 153 7387 2353 Manager Guo

E-mail:

WhatsApp:

Get in Touch

Get in Touch

Copyright © Sino-sina Building Materials Co., Ltd. All Rights Reserved | Sitemap | Powered by