This product has the characteristics of good self-flow, fast hardening, early strength, high strength, no shrinkage, micro-expansion; non-toxic, harmless, non-aging, no pollution to water quality and the surrounding environment, good self-tightness, rust-blocking and so on.
Keywords:
Rapid-setting concrete
Fast concrete repair mortar
Cold weather concrete patch
Bridge Expansion Joints
Product Introduction
Rapid-Setting Concrete is an ultra-early-strength concrete structure repair material formulated with cement as the basic binding agent, high-strength material (quartz sand) as the main aggregate, supplemented by polymer adhesive powder, high-efficiency water-reducing agent, early-strengthening agent, expanding agent, and anti-segregation and other substances. This product has the characteristics of good self-flow, fast hardening, early strength, high strength, no shrinkage, micro-expansion; non-toxic, harmless, non-aging, no pollution to water quality and the surrounding environment, good self-tightness, rust-blocking and so on.
Why Choose Our Rapid-Setting Products?
1. Industry-Leading Speed & Strength
Fast-Setting Concrete:
20 MPa in 1 Hour (ASTM C1604) – Reopen traffic 4x faster.
Subzero Application: Works at -10°C with no heated equipment.
Concrete Repair Mortar: 30-Minute Initial Set– Patch potholes before peak traffic.
Bond Strength ≥2.5 MPa(EN 1542) – Outlasts original concrete.
2. Unmatched Versatility
All-Weather Use: Resists rain/snow within 15 minutes of pouring.
Multi-Surface Adhesion: Bonds to concrete, asphalt, steel (tested per ASTM C882).
Custom Mixes: Choose flowable (slump 200mm) or non-sag grades.
Highway Potholes: 2-hour repair with 10+ year lifespan .
Bridge Deck Spalls: Restore load capacity overnight.
Airport Runways: FAA-spec rapid repairs .
Warehouse Floors: Fix forklift damage during night shifts.
Parking Garages: Permanent repair of scaling/cracking.
Arctic Oil Rigs: Cure at -20°C with anti-freeze additives.
Coastal Structures: Chloride-resistant (≤0.1% Cl⁻ penetration).
Q:Can I apply it over wet surfaces?
A: Yes! Our HydroShield Additive allows application on damp concrete.
Q:Does it match existing concrete color?
A: Custom tints available (RAL/ Pantone matching).
Product Parameters
Product name | 2h compressive strength | 24h compressive strength | 28 days compressive strength | Usable time after mixing with water | Final setting time |
Fast concrete | ≥20Mpa | ≥30Mpa | ≥50Mpa | Approx. 30min adjustable | About 60min can be adjusted |
Packed in composite bag, net weight 25kg/bag, shelf life 3 months; need to be stored in a dry and ventilated room, the bag is sealed, pay attention to moisture-proof, anti-freezing.
Hot Products
Start Enhancing Your Business With a Concrete Solution Today
Our products have undergone rigorous testing at our national testing laboratory (CABR testing center co., ltd). Renowned Fortune Global 500 firms such as China Railway Group Limited, China Communications Construction Company Limited, and Sinohydro are among our esteemed clients.
Navigation
Navigation
Contact Us
Get in Touch
Get in Touch